10 Common Electrical Problems to Watch Out For

Electricity is one of the driving forces behind modern living; most of us can’t remember a time without at least having the convenience of light bulbs. Electrical units and appliances are very commonplace for many people. However, behind all the many helpful uses of electricity, there are quite a few problems to look out for. Electrical issues can lead to dangerous electrical emergencies, so they should be treated very seriously.

Here are 10 of the most common household electrical problems to look out for:

1. Electrical Surges

Frequent electrical surges can be the result of many things, including damaged power lines, a lightning strike, poor household electrical wiring, and even defective appliances. Normally, a surge will last only a fraction of a second; if an object experiences multiple frequent surges, it will be significantly damaged and not last nearly as long.

2. Faulty Light Switches

If any of your light switches are not working correctly, you have a couple troubleshooting options. Dimmer switches that have trouble adjusting properly are usually the fault of poor craftsmanship and material. A mysterious switch that doesn’t appear to connect to any fixture at all could mean anything from a faulty outlet, circuit, or wiring. It is always smart to check with a professional electrician if you have any problems with your home wiring

3. Dips and Sags in Power

Similar to electrical surges, these can be the result of poorly made devices connected to your electricity.

4. An Overloaded Circuit

This is one of the major causes of a tripped circuit breaker. Overloading a circuit can be very easy, especially in older homes that are unable to cater to the amount of electricity some appliances require. Some appliances draw more electricity than others, so it is good to take note of what uses the most power. It also helps to unplug anything that is not in use, including cell phone chargers.

5. A Tripping Circuit Breaker

While circuit breakers are meant to trip (that is their way of protecting your home), you should make sure to note exactly what is causing your breaker to trip. If it was something particularly high wattage like a hairdryer or a microwave, try using a lower setting if you are using them at the same time as other electrical appliances.

6. Electrical Shocks

Electrical shocks are an unfortunate experience, and at worst incredibly dangerous. Fortunately, they are normally a mild static shock level of pain, but they are still a frequent reminder to be careful when handling electricity. These shocks can be caused by an issue with an appliance’s wiring or the appliance itself, so always be careful when turning objects on and off.

7. Lights Being Kept Too Dim or Bright

Different lights may utilise different wattages; check your main connection and that your bulbs are correct.

8. Bulbs That Burn Out Too Quickly

If your light bulbs are burning out too frequently, here are some of the common causes behind it:

  • Poor circuit wiring
  • Too high of wattages
  • Your insulation is located too closely to the bulb
  • The dimmer switch (if applicable) is overloaded with too much wattage

9. Unusually Expensive Electrical Bill

Here are some tips to help lower your electrical bill:

  • Identify and fix any devices creating power surges
  • Unplug appliances and other devices when they are not in use
  • Make sure your electrical wiring is up to date

Light that Turns off and Turns Back on Later

Some lights, like downlights for example, are made with the safety feature ability to automatically turn off when the light itself heats up too much. This is caused by either your ceiling insulation being too close, or your bulb is too high wattage.

A great precaution against any potential electrical problems is to have a quality electrician inspect your home. Contact our team on our Richtek Electrical website for any electrical questions or issues you may have.

What to Do in an Electrical Emergency

Electrical appliances are very commonplace in any modern home or workplace due to their convenience and importance in everyday use. When is the last time you went an extended period without preparing food in your electric oven? Appliances such as ovens, washers, and dryers are used all the time thanks to electricity.

Unfortunately, there are a lot of risks associated with the use of electricity. Electrical hazards or emergencies can be caused by something as simple as an overworked circuit or a frayed cord that creates a spark or an electrical shortage. To protect yourself from a potential electrical emergency, it is important to regularly maintain all of the electrical systems within your home, including any appliances. However, if you experience an electrical hazard, the proper procedure may vary depending on the situation.

Types of Electrical Emergencies to Watch Out For

Electrical Fire

 

This is one of the most common hazards you may encounter. Typically, a frayed cord located too closely to fabric or curtains or a short circuit can cause this. These dangerous fires need to be dealt with quickly and efficiently, so it is helpful to know the proper steps to take as a response.

Some helpful responses to an electrical fire include:

  • Cutting the power

The first step you should take is to cut the power to the appliance or electrical system that is creating the issue. Instead of simply unplugging the object or turning the switch off (as this can be dangerous), you should flip the switch on your breaker box.

  • Douse the flames with a fire extinguisher

If you are fortunate enough to have a fire extinguisher on hand, knowing how to use it to put an electrical fire out is extremely handy. This is a good follow up step if you were not able to turn the power off to the source of the fire because they make extinguishers that are safe to use on objects that are still connected to electricity (Class-C rated extinguishers). If you did cut the power, you can safely use Class A-rated fire extinguishers.

  • Practice smart fire safely

If the fire is uncontrollable, you should leave and exit the space as quickly as possible. When you are in a safe space, you should call 911 (you should do this in the event of any fire) and remain close to the ground to keep yourself safe from smoke.

Electrical Shock

Electrical shocks are sometimes unavoidable, but they can be very frightening and need to be treated seriously. Here are some helpful steps to take if you or a loved one experience an electrical shock:

  • Do not touch the shocked individual

If the person who experienced the shock comes in contact with another person, they could cause that person to be shocked or even electrocuted.

  • Cut the power

If possible, turn off the power on the circuit breaker for that area of the house. This step should be completed as quickly as possible.

  • Call for assistance

Immediately call 911 after you have turned off the power or moved the person away from the source of their shock. CPR and first aid training might be needed for the victim, even if they say they are feeling fine. Electrical shocks can have odd effects that are not always noticeable right away.

Power Outage

In the event of a power outage, you should:

  • Investigate the source

There are many possible causes for a power outage, and it may be something as easy to fix as a short circuit or a tripped breaker. Reset your breakers to make sure that they are not causing your power outage.

  • Be Prepared

Keeping your electrical systems up to date is a good way to prevent a power outage. Contact our team if you have any questions or concerns regarding electrical safety or if you are looking for a reliable electrician to inspect your home.

Preparing for Electrical Emergencies

What would you do in the event of an electrical emergency? If one happened in your home today, would you be prepared and know how to react? Here is everything you should know to do before an electrical emergency occurs, so you are best equipped to prevent or handle them when they do happen.

Have Your Home Inspected by a Professional

It’s wise to have a professional inspect your home on a fairly regular basis to ensure that nothing is amiss. If you notice that any of your electrical equipment or fuses are not acting as they should, it is a good idea to have them looked at by a professional – if not for functionality reasons, then for safety reasons at least.

Even if nothing in your home appears to be malfunctioning, it is still a good idea to have your home inspected for electrical issues now and again. This is especially true if you have an older home. Older homes usually have older wiring, which may still be in place since the home was originally built. You’ll see signs of electrical issues, such as outlets that don’t work, and these could be signs that the wiring is starting to fail. A routine electrical check can help prevent any accidental electrical fires from happening.

Stay Up to Date with Maintenance of Your Appliances

Your appliances may need to be maintained – and if they are not, the result can be an electrical emergency, such as an electrical fire. Read the manuals of new appliances as you purchase them and review the requirements of the appliances you already own. Make sure to keep up with any maintenance that these appliances may require. By staying up to date on things such as this, you can do your part to prevent an electrical emergency before one needs to happen!

Keep Your Home Stocked with the Essentials

In the event of something like a power outage, you’ll want to make sure that you have everything you need to function as usual in your home. The types of things you will need include plenty of extra batteries, flashlights, candles, battery-operated appliances such as heaters and fans, and more. You may also want to stock up on food in case the electrical emergency isn’t just affecting your home but the whole neighbourhood or even the city!

By having these essentials stocked up in your home, you will be prepared in the event of some electrical emergencies, such as the power going out. Think about the types of things you use on a daily basis that require electricity. Try to find alternatives to the most necessary of those functions that don’t require electricity and have them on hand in the event of a power outage.

Know Your Electrical System

An important step in being able to develop an emergency response plan is being thoroughly familiar with the design and layout of your electrical distribution system. The documentation that came with your system should also include one-line diagrams, which illustrate how the main components of your electrical system connect to one another – including available spares and redundant equipment.

By familiarizing yourself with this or having it on hand, you can react much better in an electrical emergency – because you know what is being affected and are equipped with the knowledge to handle it.

The Verdict

At the end of the day, preparing for an electrical emergency is important. You can do things to prepare on your own, and consult a professional to ensure the safety of your home for good measure. However, in the event of an actual emergency happening, make sure you know when to call a professional to restore order and safety to your home!

How to Find a Reliable Emergency Electrician in Perth

There are few things more frustrating than having your power go out in the middle of the night. Being stuck in the hot temperatures of Perth with nothing to power your air conditioner, or finding yourself without power on the weekend when the typical electrician isn’t working, can be the cause of a whole world of headache.

This is where emergency electricians in Perth come in! There’s good news and bad news, though. The good news? There are a lot of options to choose from when it comes to finding an emergency electrician in your area. The bad news? It can be difficult to find the right one for you that you can faithfully rely on.

That’s why we’re here to help make that decision easier for you. Here’s everything you need to look at when trying to track down a reliable emergency electrician in Perth that is going to get the job done well, in a timely manner, and get it done right the first time around!

Find Companies Near You

The first step is to find companies that meet the most important requirement – that they are near you. Find local companies in Perth that offer emergency electrician services to begin your search. Once you have compiled this list of contenders, your next step is to start narrowing down your options to find a company that will work best for you.

You can find companies near you with a simple web search. It will likely turn up a significant number of local companies in Perth willing and ready to provide you with emergency electrician services. The trick is being able to tell the gems from the duds. That’s where these next steps come in!

Research Your Options

Once you have a list of local companies compiled, it’s time to start the research phase. For most of the questions you have about their services, you should be able to find on their website. Take a look at their website, read through it and what they offer with their service. Find what their hours and availability are, especially during those emergency hours – like weekends and after dark. Look at what they charge for their service and ask yourself if it fits into your budget.

Reading through their website, you can get a feel for if the company seems like a reputable service that you would like to have in your home and trust with your emergency electrician needs. If the company is riddled with typos, then you probably are going to want to pass on them as they’re probably not a very reputable company. Does their About Us page resonate with you? Are they dedicated to customer satisfaction and going the extra mile to make sure their clients are well taken care of? If so, and they meet your other requirements, they may be a good option for you.

Compile a list of all the companies that appear to have passed the research phase of your search for the right emergency electrician in Perth. These are all the companies that meet your requirements based on their website. Next, you have to find out if they’re actually the real deal.

Check Out Their Reviews

The next step is to check out the reviews of the companies that made the cut to determine whether or not they’re really up to the task. To put them to the real test, you need to find out what other people have thought in the past after using their service.

Ask any friends you may know who have used their service what their experience was like. You can also search for reviews of the company online to get an idea of what previous people have thought about the service they provided.

The Verdict

We understand that you have a lot of companies to choose from when it comes to an emergency electrician in Perth. That’s why we strive to make that decision easy at Richtek by providing quality electrical solutions every step of the way!

We hope this guide has helped lead you towards the right emergency electricity service provider in Perth for you!

Power point options

In an age where the range of laptops, tablets, smartphones and other devices hang around the home and office like furniture, it is hard to imagine a time without them. But they are here to stay and all need regular charging with USB chargers. But bulky USB adaptors, such as the big box at the end of your iPhone charger, not only hogs outlet space in the home, office or public space, but also takes up unnecessary space in your pocket, bag or indeed suitcase when on your travels. With USB power points becoming more of a necessity than a luxury, you may have started to ponder if it is time to upgrade your power points and start thinking about hiring a professional domestic electrician to make life easier.

Fortunately, USB power points are now regularly being installed by a domestic electrician in Perth like Richtek Electrical Solutions in new homes and flats and are increasingly becoming a popular feature requested by homeowners and investors. And installation is pretty straightforward. It comprises of a simple swap over, of an existing power point with a wall mounted USB Power point.

Most homes nowadays have a number of smart phones and tablets at the very least. Having said that, chances are with larger families, there is likely to be a whole host of other items that require USB charging including digital cameras, fitness trackers, video cameras, camcorders, mp3 players, Go-Pro, GPS, game consoles, and bike computers. The devices listed above are enough to cause mayhem in the home or office with tangled cables and traditional power points being overloaded. Not only are these unsightly, but they also represent some serious health and safety hazards around the home or office say electrician in Perth experts Richtek Electrical Solutions.

It is surprising that despite the exhaustive list above of devices needing USB power points changing points, the majority of homes still do not have USB sockets built into power points. But builders and domestic electricians in Perth are becoming savvy and wall mounted USB power points are being made widely available and are fast becoming standard installs both in commercial and residential homes.

USB Power Socket Options

The benefits

There are a plethora of benefits to installing USB power points both in your home and office. Richtek Electrical Solutions have listed some of the benefits below.

Greater current supply

Nearly all smartphones, tablets, and other mobile devices can be charged using the charger for the device or plugging a cable into your computer or laptop’s USB port. But the standard desktop computer USB port is often limited to a maximum current of 500 amps. In contrast, wall chargers deliver a much higher voltage, which translates into being able to charge your device in less time. Therefore, by utilising a USB power points, you can enjoy the convenience of not having to charge your device constantly and hence saving on recharge time.

Far more convenient

We all have experienced frustrating moments when our device is operating on low battery but there is no charger to be found. It is often the case that we use our devices in multiple rooms so the charger could be in a number of different places. And when we need it the most, it is difficult to locate. But if you have power points with USB chargers dotted around your home or office, you no longer need to run around hunting your charger. You can simply plug in your device and top up on the battery. On top of that, since most USB power points have multiple ports, several devices can be charged simultaneously. This will help solve the problem of clutter in the shape of multiple bulky charger units.

Much better safety

Electrician specialist Richtek Electrical Solutions, who undertake any electric-related task in Perth and the surrounding areas, have witnessed cases where power points become a hazard due to the clutter of adapters and chargers. Plugging in numerous charger units can overload the power points, which is dangerous and could possibly result in a significant fire hazard. Thankfully, because USB power points are a lot more efficient at charging various devices, there is less need for using multiple power adaptors. As a result, the risk of overloading is minimised.

Increased durability

You may not be aware, but chargers for smartphones, tablets, video cameras, game consoles, and other mobile devices are susceptible to damage. Add to that, the need to buy a brand new charger when upgrading your device, it is highly unlikely your existing charger will be compatible with the new one. So, by getting an electrician in Perth to replace your outlets to power points with USB chargers, you will no longer need to rely on twitchy chargers because you can plug them in directly.

Planning for an electrical system in the home

Whеn planning the electrical system in your own home, it will pay to take into consideration installing dedicated USB power points аrоund thе house which can act аѕ charging stations. This will save you from constantly moving уоur devices аnd chargers around. Some of the key places tо install USB power points are, thе kitchen, living room, bedroom, hallway, landing and a home office. By having dedicated charging zones, areas will be less unsightly and you will know exactly where all your devices are. Nоt оnlу аrе dedicated charging areas lеѕѕ unsightly, but thеу аlѕо mаkе іt easier fоr уоu tо kеер track оf еxасtlу whеrе аll уоur devices are.

But installing a new USB power points or replacing an existing power point is not a task to take on board yourself. You need a qualified electrician in Perth like Richtek Electrical Solutions to do this for you. That’s because by law an electrical license іѕ required bеfоrе аnу electrical wiring work саn bе undertaken іn Perth. Richtek Electrcial Solutions іѕ licensed, insured аnd bonded tо carry оut thіѕ type оf electrical services іn Perth and surrounding areas.

If you need an electrical contractor for domestic or commercial purposes that guarantees quality workmanship, excellent communication and an efficient service, the professionals at Richtek Electrical Solutions are waiting to take your call. They can be contacted on (08) 9375 3926.

 

How to Change a Smoke Alarm Battery

It’s important to regularly check and change your smoke alarm battery. But with so many models on the market, it can be difficult to work out how to change it. Luckily, most smoke detectors take the same 9V battery, and smoke alarms have been designed to make it safe to change the battery without danger of electrocution. If you’ve lost your instruction manual, it’s usually still fairly easy to replace the battery, and here are a few things to remember.

Replace the battery annually

Smoke alarms should be tested once a month by pushing the ‘test’ button, and if the battery has run out, obviously it’s time to replace. However, you should also change the 9V battery once a year, whether it’s run out or not. If you have an alarm that has been hardwired by an electrician in Perth, there is usually a backup battery. It’s important that this works, as it can detect a fire even if your power is cut-off.

Clean your smoke detector

Not many people realise you should clean your smoke detector. With the cover on, use a vacuum cleaner to suck dust between the holes, and wipe down the exterior. This will:

  • Remove dust from the sensor, making it more efficient
  • Prevent false alarms
  • Lengthen the life of your smoke detector
  • Remove build ups of pet hair, dander, and pollen

Look at the expiry date

Changing your smoke alarm battery is a good excuse to check the expiry date. By law, smoke detectors should be replaced every ten years because they become less sensitive over time. Older smoke detectors can also be less reliable. If you look at the back of the head, you should see an expiry date, and can decide whether it’s time to replace.

If it’s time to replace your smoke alarm, it’s worth looking at getting a hardwired model installed. Contact an electrician if you’re thinking of getting one of these systems. One of the main advantages of these systems is that they’re connected, so if one goes off, they all do. This ensures if there’s a fire, everyone in the house hears the alarm.

Use a reliable battery

Your smoke alarm battery is not something you should be scrimping on. Make sure you used a recognised brand of battery to ensure reliability. Usually, it’s easy to change a battery, just twist or pull the cover off, pop the old one out, and put in the new 9V battery, ensuring the + and – symbols are in the right position.

When the cover is back on, press the button to test the alarm. If you’re using a hardwired system, there’s usually a green light to show that the system is switched back on, but you might need to check your manual if your model is a little different.

For help with the installation and maintenance of smoke alarm systems, call Richtek Electrical & Air Solutions on (08) 9375 3926. With emergency call-outs available, they can help you keep your home safe.

Christmas lights do’s and don’ts

Year on year, we see that it’s becoming more common for bolder displays of Christmas lights outside of homes around the suburbs of Perth. As the festive season has crept up on us quickly this year, we thought we’d put together this brief guide to installing your lights safely. As the trend for bigger Christmas light displays increases in Perth, there is more potential for nasty accidents, so it’s always better to be safe than sorry.

Please remember that any faulty electrics can be deadly, so it is vital that you don’t cut any corners when it comes to safety. Hopefully, by following this brief ‘do’ and ‘don’t’ list we’ve put together, this will ensure you’re still able to enjoy the festivities to their fullest this year, but also keeping you and your family safe.

Christmas Lights Safety

The Do’s

 

  • Do buy your lights at a Christmas store

 

As early as October, you’ll probably see a few ‘pop-up’ Christmas stores appear around the city. This gives you a couple of months to choose the correct lights that you want for your home. These kinds of shops will also sell other Christmas display goodies, such as reindeer structures and Santa statues that you may wish to include in your Christmas display design.

Other retailers will also stock Christmas lights, such as supermarkets, hardware stores, and big box home stores. Shop around to see what the best value is for your money, although you’ll probably find that the pop-up stores offer the best selection and lowest pricing.

Whilst you’re shopping around for lights, look out for some of the other accessories you might need, such as weatherproof cable boxes, extension leads and cable clips. You’ll certainly need some of these things if your aim is to create an exterior lights display.

You may not know exactly what you need, so you can ask the shop staff to help you, or talk to us and we can best advise you about outdoor electrical set-ups. We’re one of the most trusted electricians in Perth and will be glad to ensure your lights are rigged safely.

 

  • Do Plan Your Design

 

The first step in installing your light display is planning it all out properly. You may have some unique ideas to make your lights display stand out this Christmas, so get your ideas together, make a design, and then stick to it.

Once you have your design planned out, list all the types of lights and accessories you’ll need and then create a budget. If your shopping list is more than your budget allows, you may have to minimise some aspects of the design, whilst still sticking with the overall look of the display.

 

  • Do install the Lights Correctly

 

If you are going for an outside display, then you’ll need the correct safety precautions, such as all-weather cable boxes and rugged extension leads. You’ll also need to consider how and when the lights are switched on and off.

The most basic way of controlling the lights is to use a plug-in timer from an internal power point so that it is done automatically. You can set the timer so that it will switch the lights on and off for you, but for this to happen safely you must also ensure all the wiring coming from your house to the lights has been installed correctly.

The Don’ts:

 

  • Don’t buy non-compliant Christmas lights

 

It is crucial that you buy lights that are compliant with Australian standards. Whilst lights bought at a Christmas store will probably adhere to these standards, you should always check first before purchasing. The lights should have C-tick and/or RCM mark, which means they have been approved by the Australian electrical standard.

If you don’t buy these safety-standard compliant lights, you could be risking someone’s life with electrocution. Non-compliant lights may be a cheaper option, but don’t forget that dealing with electricity is dangerous, so total care must be taken at all times when buying and installing Christmas lights.

 

  • Don’t use makeshift weatherproofing devices

 

Your outside lights will be exposed to the elements, so always ensure your weatherproofing is legit and designed to do the job. Transformers require protection from the weather, and you can buy weatherproof boxes for a reasonable price, so it makes sense not to try to cut corners with any makeshift devices.

 

  • Don’t create unsafe wiring hazards

 

As well as ensuring your transformers are protected from the elements, you must also see that you use good-quality extension leads. Without them, it could lead to a dangerous accident.

You can check the quality of the extension cable before plugging it in by running your hand along the cable to see that it is all solid and in one piece. If the cable has been damaged, then you should replace it with another one.

Once you know the extension leads are intact, you should make sure they do not present a hazard where people might trip over them, or they get driven over by cars. Extension cables should be well out of the way; otherwise, they become a hazard.

If you do find that your extension cables are getting in the way, then you could consider installing some external weatherproof power points as another, safer option. An electrician in Perth will be able to advise you about putting in some external power points, and it is a worthwhile job to have done if you want to ensure your Christmas lights are installed in a safer way than using extension cables from indoors.

Finally, you should check all the wiring and bulbs of the Christmas lights themselves. If anything is faulty, then you’ll need to replace it. We generally advise people not to try and fix faulty Christmas lights because the electrical arrangement is complicated and can lead to unnecessary accidents. Instead, if any of your Christmas lights are damaged, simply throw them out and buy new ones.

 

  • Don’t forget to have fun

 

Christmas is the time to be jolly, and from all of us at Richtek Electrical and Air Solutions, we wish you to have a very happy Christmas, but please stay safe. To speak with us about any of your electrical concerns this Christmas, call now on (08) 9375 3926, and we’d be delighted to advise you.

Perfect Ways to Save on Your Electricity Bill

Electricity bills are never welcome when they land on our doormats or in our inboxes but did you know that there are plenty ways you can reduce the shock factor when it comes to paying for your power? Richtek Electrical give their handy hints for you to reduce your electricity expenditure.

How Much and How Long?

Most of us take our electrical appliances for granted and use them as and when we feel like it, but if you want to save money, it’s important to take a good look at the electrical appliances in your home and consider how you use them. While it’s true that a kettle uses roughly the same amount of current as heater, you only use your kettle in short blasts. However, when it’s cold, you might have your heater on all day, meaning the bill rises as fast as the temperature does!

The Guilty Parties

Heaters, especially element heaters aren’t the only electrical appliances that send those electricity bills soaring. These days most of us live our lives online and multi-function printers, Wi-Fi routers and computers on charge are a big drain on our pockets when it comes to electricity bills. And even if it’s not in use, leaving your Hi-Fi, surround sound system or games console on standby will get your bill clocking up. In Perth, pool pumps left on all the time are another red alert and if you keep fish, the bigger the tank, the bigger your water-heating costs will be. Drying clothes and crockery is also an expensive area, with both tumble dryers and dishwashers using considerable amounts of power. Halogen lights are also an issue because not only are they expensive to run, usually multiple lights are needed per room.

What’s the Alternative?

If you want to save money on your electricity bills, going back to basics is a great place to start. Get organised so that you can dry your washing outside instead of rushing to dry that shirt in the tumble dryer at the last minute. In the chillier months, using a gas or real fire is a cost-effective way to heat a room and how about that old tip of layering up with a cosy jumper and thick socks instead of reaching for the heating control or electric blanket? Bar heaters are incredibly expensive to use as they use full current at all times, so consider an alternative such as an oil heater, which is slower to heat up but burns less money. When it comes to cooking, use the stove top where possible instead of heating up the electric oven or switching on the microwave. And when it comes to firing up the dishwasher, why not do the dishes by hand or at least wait until the dishwasher is full before you switch it on? And it’s hardly a lightbulb moment, but switching lights, TVs and radios off when you leave a room is an obvious but often-forgotten way to get those bills down.

Get Smart

As well as the old-fashioned ways to save power, these days you can cut that bill by taking advantage of tech. For a reliable electrician, Perth is served by Richtek Electrical, who can advise you on all aspects of your domestic electricity needs. This could include taking a look at your appliances and advising on how you can use electricity more efficiently and cheaply. For example, did you know that you can save significant sums by installing in-line power timers? These handy devices enable you to switch off electricity-guzzling devices when you are not using them – typically overnight. Generally speaking, any device that uses large amounts of standby power through a remote control such as TVs, games consoles, surround sound and printers will draw a large amount of electricity, so letting these appliances sleep when you do, means you stop spending unnecessary dollars.

Bright Ideas

When it comes to the services of a domestic electrician, Perth has many demands, but these days switching clients over from incandescent to LED lights is one of the most popular ones. Turning off the lights when you’re not in the room or indulging in a bit of romantic candlelight may be the number one way to get those bills down, but upgrading your lighting system will help you cut your bills as well as brighten up your living space. This is because energy-efficient LED downlights use an amazing 1/6 of the energy consumed by traditional lighting. Not only that, they don’t constantly break and need replacing due to the heat generated in their use like old-fashioned halogens. And don’t forget an LED TV is more energy efficient than a plasma one.

Short’n’Sweet

Lots of us like to take a long shower to get revved up for the day or wind down from a work out, but unfortunately this indulgence equates to dollars down the drain. This is because not only are instantaneous water heating systems expensive to run, our storage hot water systems also cost a lot to replenish every time someone lingers too long in the bathroom. So, to save money, make it a house rule to make showers as brief as possible. And why not switch off your water heating system next time you’re away?

Be a Power Detective

Another great way to reduce expenditure is to have a cent-o-meter installed to your main switchboard. This way you’ll be able to monitor your electricity usage whenever you need to. Not only that, you’ll soon be able to spot patterns that will tell you what the main drains on power and your finances are. This means you can take action by getting the whole family to use the old-school tips above to get those bills back to a figure you can live with.

For a 24 hour electrician in Perth, Richtek Electrical are on hand for all your electrical needs, so contact us now for friendly, expert service you can rely on.

4 Things You Can Do to Ensure Electrical Safety in Your Home

Electrical issues in the home can range from annoying (a minor shock) to the catastrophic (an electrical fire). Thankfully, taking a proactive approach to safety and being conscious of the risk factors can go a long way toward minimising the risk of harm or property damage caused by electricity.

Using the services of a qualified Perth electrician is the best way to identify any potential problems in your wiring or electrical appliances, but there are also a number of things you can do at home yourself. Here are four things to keep an eye out for to ensure electrical safety in your home:

Test Your Residual Current Device

A residual current device (RCD) can be the difference between life and death. An RCD immediately breaks an electric circuit when you make contact with it, preventing ongoing electric shocks and reducing the risk of serious injury. You should have at least two RCDs in your home.

Despite the critical role they play, RCDs are known to be susceptible to corrosion, particularly here in Perth where the coastal air can accelerate the oxidation process. To prevent this from happening, regularly test your RCD by simply pressing the push button present on the device.

Assess Your Smoke Alarms

Since 1997, it’s been mandatory for all new and renovated properties in Western Australia to install mains powered smoke alarms. These alarms play a key role in protecting you in the event of a fire, so it’s important to ensure they’re in good working order. Verify the green LED light is glowing and check the expiry date – most smoke alarms will last for a maximum of 10 years, though some fail long before this date.

Check Your Light Switches for Cracks

Every time you turn a light on or off, the little springs inside the switch put pressure on the plastic. This can eventually create small cracks in the case and leave the electrical innards exposed, which would electrocute you if you were to touch them. Keep this risk to a minimum by regularly checking your light switches for cracks and repairing any evident damage.

Get a Professional Electrical Inspection

The modern home contains so much complex wiring that it’s almost impossible (and unsafe) for most people to check it all on their own. The good news is that your local domestic electrician in Perth can carry out a thorough inspection on the condition of your home’s wiring, switchboard and RCD integrity, and identify any potential issues that may need to be addressed. As a general guideline, we recommend getting a professional electrical inspection about once every three years.
Are you looking for an expert Perth electrician? With more than 12 years in the electrical industry, Richtek Electrical Solutions has the experience, advanced diagnostic tools and specialist knowledge needed for any residential or commercial electrical work in Perth. Contact the team today to discuss your options.